TQC Wet Film Thickness Gauge

$0.00

5 in stock

Description

 

The TQC Wet Film Thickness Gauge WG is a hexagonal/octagonal precision measuring comb made of heavy stainless steel. The high-grade stainless steel will not be affected by acid or base elements. Models available for several different applications.

Wet Film Thickness Gauges are designed to measure the thickness of coatings immediately after they have been applied to a substrate. The gauge has a series of notches cut into its sides like the teeth on a comb. The wet film thickness of coatings including paints, resins, lacquers, varnishes and gels etc can be measured.

Use

  • Place the gauge at a 90° angle to the coated substrate
  • Make sure the gauge is in firm contact with the substrate.
  • Remove the gauge in a straight line up.
  • Assess the teeth of the gauge. The wet film thickness lies between the largest tooth that is wet and the smallest tooth that is not wet.

Click here for:
DATASHEET

Item Nos:  CSTSP4000

 

TQC Wet Film Thickness Gauge WG-1 20-370 µm in 24 steps (6×4) for decorative paints and primers.
CSTSP4010
TQC Wet Film Thickness Gauge WG-2 25-2000 µm in 36 steps (6×6) With edge radius check (2mm) for protective coatings and high solids.
CSTSP4020
TQC Wet Film Thickness Gauge WG-3 50-10000 µm in 72 steps (8×9) for extremely thick films such as floor coatings, fillers, fire proofing, plaster, adhesives etc.
CSTSP4050
TQC Wet Film Thickness Gauge 1-80 mils in 36 steps (6×6) With edge radius check (2mm) for protective coatings and high solids.